|
1. Delefcted Height (H1)
This is the height at which the washer should be compressed to measure the load.
2. Insdie Diameter (ID)
The values published in the catalog are those of the blank size before bending. The formed washers become ovate during bending.
3. Load at H1 (Load)
The catalog lists ranges for the load which can be expected when the washer is deflected to the height "H1". The loads are based on a process capability index of 1.33Cpk.
4. Outside Diameter (OD)
The values published in the catalog are those of the blank size before bending. The formed washers become ovate during forming. The washers were designed to work with the bearings specified in the "Former Catalog Number" column.
5. Overall Height (H)
The overall height "H" is an approximate value. It is slightly adjusted around the published value at manufacturing to meet the load at the deflected Height "H1". It should be noted that the height is the only variable that is adjustable in the manufacturing process due to the O.D., I.D. and material thickness being fixed.
|
